Call Now: +357 77771314
“We specialize and offer medical rehabilitation and physiotherapy equipment”
You are here: Home
Products
Occupational therapyConfigurable structures
Ergo 400

Ergo 400
AR10004

Contact Us

Description

This is an advanced wall-mounted panel, set up for using a single work aid at a time.  The module is inserted by sliding in specific guides, and locked in place using a lever device.

The aid can now be easily adjusted in height without any tools or repositioning, making variations and progression possible when executing the same exercise.  

The adjustment system is simple and does not require any force on the part of the therapist. The aid can therefore be adjusted between 54 and 200 cm, at 2.5 cm intervals.  

The aid attachment also makes it possible to do the same exercise at a tilt of 0° to 90°, from vertical to horizontal. 

The work module can be freely chosen from the libraries available.
The structure is in metal and is supplied with specific hardware.

Accessories

Horizontal Spiral
AR10008
The aid exercises the subject in prono-supine positioning hand movements. Specifically, the subject is asked to keep the ball between the first three fingers on the hand and guide it over the sinusoidal path.
Vertical Spiral
AR10009
An instrument similar to the horizontal spiral, but different in that this exercise calls for greater involvement of the upper limb.
Oblique Spiral
AR10010
This aid involves work on the horizontal plane. The elbow bends and extends to reach the curves on the flexible element.
Worm Screw
AR10011
An aid that is useful for a patient to work independently in order to recover joint function between the interfalanx on the finger and prone-supination.
Flexo Extension
AR10012
The patient puts their forearm into a support that holds it in place. The fingers are connected to the elastics, keeping finger's flexing muscles extended, changing the passive rigidity over time.
Ladder 10
AR10013
The ladder can be positioned on a vertical panel, on a surface at a variable tilt and on a table. The aid is positioned so that it reaches the furthest reach of the fingers, with the elbow extended.
Prone Supination
AR10014
This aid is used to invite and guide the patient through prone supination tasks with their forearm: the patient has to overcome the resistance offered by the aid.
Latches
AR10015
A sliding latch and a turning handle. Due to this instrument's size, the patient has to have a fine grip using the first three fingers. Supination and pronation rotating force is required to turn the handle.
Electricity
AR10016
Activating a switch and inserting a plug in a socket. Inserting a plug in a socket is a task that calls for attention, coordination and evaluation of the force to do so safely.
Handles
AR10017
Aid made up of a window handle (180° rotation about a central pin) and door handle (90° rotation about a pin to one side).
Cups
AR10018
In gripping the cup the weight of the object is used because the circumference is supported by the grip formed by the thumb and middle finger, and a hook made up of the index finger.
Clips And Buttons
AR10019
The aid comprises 4 press studs on the one side and 4 buttons like those found on many items of clothing on the other side.
Laces
AR10020
On one side this aid has laces with holes and "eyelets” (closed rings), and on the other laces hooked in an "oblique” direction by chromed hooks, both of which are found on many types of footwear.
Buckles
AR10021
This aid has a clip belt buckle on the one side that can be altered in length, and an end complete with zip that can be opened.
Screwing In Pegs
AR10022
To do the tasks using this kit, coordinated use of both hands is essential. This aid has 5 different peg head shapes for various levels of difficulty of gripping using the fingers.
Elastic Slalom
AR10023
This aid is made to allow patients to exercise using "slalom” tasks between the pegs, following a sequence determined by the therapist on each occasion.
Tightening Cylinders
AR10024
It has 3 head diameters for varying levels of difficulty in gripping for the hand - wrist. The "heads” can simulate the caps on food jars, a light bulb, gas tap, etc.
Olympic Discs - Small Board
AR10027
Rectangular base panel supplied together with 4 cylinders and 4 contoured discs, designed to promote a grasp with an almost open hand and extending the metacarpophalangeal and Interphalangeal joints.
Magnetic Games - Small Board
AR10029
Rectangular base panel supplied with 8 pins with a magnetic top, and 8 different coloured metal discs. Used for colour recognition as well as to help improve calculation skills and create shape and colour sequences.
Fantasy Sticks - Small Board
AR10031
Rectangular base panel supplied together with metal cylinders that can be inserted freely into the thirty holes arranged in the base. Devised for hand-eye coordination and improving dexterity.
Tracks - Small Board
AR10047
Aid provided with two different shaped aluminium pins, two different sized spheres, and one plastic cylinder. This exercise aid improves the use of fingers, wrists, upper arms, hand-eye coordination.
Ladder 10 With Handgrip
AR10050
The primary function of this equipment is to help mobilise fingers following the grooves. The knob allows the wrist and elbow to flex and extend, and the shoulder to be mobilised.
Basket
AR10051
The purpose is to practice passing objects through a certain gap upwards and downwards, or sideways (from right to left, or left to right), as well as to try hooking up everyday objects on the edge.
Hanger
AR10052
This aid enables to perform actions like hooking and sliding items with different grips on a bar.
Magic Snake 1
AR10053
Rectangular base module with a flexible plastic tube that can be bent and shaped as you wish to create the desired shape/path. The tube ends can then be slotted into the base.

Technical Spec.

Dimensions:;46 x 24.5 x 202 h cm;Weight:;32 kg