Call Now: +357 77771314
“We specialize and offer medical rehabilitation and physiotherapy equipment”
You are here: Home
Products
Standers and Tilt Tables
Tilt Table Marcus Line

Tilt Table Marcus Line
LT42____W_

Contact Us

Description

Tilt tables help to gradually reach an erect posture from a static prone or supine position when patients are unable to load their own body weight on their lower limbs.

In particular, the base model LT42 is intended for static prone use with patients who are at least 135 cm tall, and it is also suitable for a pediatric use with exercises in a supine static position. The chosen model can be later modified with the necessary accessories. Tilt regulation of the table can be done by means of an hydraulic piston or electrically, either from a wall-power source or a 24Vrechargeable battery. The adjustment controls can be hand or foot operated. Different choices for the patient’s support surface are available. This does not preclude, eventually, the possibility to interchange the different footplate modules available. It is possible to choose any of the two possibilities for the width of the padded sections and it is possible to choose among 24 different colors of synthetic leather upholstery.

A wide range of accessories can contribute to a further furnishing of the static therapy table.

WARNING!

For the application of side supports and service tray it is necessary to purchase the specific AC0910 fixing devices.

Configurator

TYPE OF CONTROL
electric, with battery supply
B
This is an alternative option for electric tilt adjustments The tilt table can be powered by a 24V rechargable battery that come with a 110/220V 50-60Hz battery charger.
electric, with wall power supply
E
The standard mains supply is 220V 50-60Hz and all drives work with very low safety voltage. Clients can make a specific request for 110V 50-60Hz supply and a non-SCHUKO plug.
hydraulic, with hydraulic piston
H
Tilt adjustment via hydraulic piston.
FOOTPLATES
single footplate
1
Single footplate which cannot be adjusted in tilt. The support block can be adjusted in depth for 21 cm centimeters along the side of the table. It can be combined with accessory AC0002.
tilt adjustable footplates, one module
2
Both footplates, right and left, can be adjusted independently in tilt +/- 20°; the supporting block can be adjusted in depth for 6 cm along the side of the table. They can be combined with accessory
tilt adjustable footplates, two module
3
Footplates, right and left, can be independently adjusted in tilt +/- 20° and in depth for 8 centimeters along the side of the table. They can be combined with accessory AC0002.
WIDTH
section width : 75 cm
075
Section width: 75 cm
section width : 60 cm
060
Section width: 60 cm
Height Adjustment
hydraulic, with double pedal
C
Hydraulic piston with pedal control available on both sides. This hydraulic adjustment is ideal for situations where there is no power supply or when you need to move the table easily.
electric, with hand control
D
Innovative ergonomic hand control with magnet. Users can attach it wherever they wish on the table frame. It comes with connection cable.
electric, with foot switch
G
Control securely placed in a special holder, which has to be attached at the base of the structure. The pedal control on its holder makes the transferring easier.
electric, with foot switch
A
This type of control can be used to activate the electric height adjustment function. The foot switch is placed on the floor. The connection cable allows for complete freedom of movement.
Padding Type
seamless rounded edges
W
COLORE
COLORE

Accessories

Additional Foot Pedal 1
AC0037
The additional foot pedal provides another way to control the table height adjustment. It can be used on both sides
Additional Hand Control 1
AC0039
Additional hand control for models fitted with single motor. Provides the table height adjustment. It has a magnet so it can be easily attached to the table frame.
Additional Control 1
AC0083
Foot pedal or hand control, fitted with magnetic, ergonomic support.
Safety Device
AC0578
This device disconnects the mains supply from the height adjustment system and stops any inappropriate use when the carer is away.
Wall Battery Charger
AC0318
Professional wall-mounted battery charger. It comes with a standard SHUKO plug. By request a cable can be provided with another plug.
Intra-Extra Sandals
AC0002
Allow the foot to be adjusted for intra/extra rotation, anteroposterior, adduction and abduction and along the anteroposterior axis.
Hand Anchor
01608
This ergonomic anchor can be applied to any smooth surface to achieve greater stability and safe positioning of the hand.
Hand-Wrist Grip
01609
This is provided with a resting pillow and Velcro wristband to ensure the hand is positioned in total safety.
Chest Support
AC0909.
Padded chest support that allows prone static exercises. Adjustable in height, does not require fixing tools. Width 36 cm.
Padded Support
AC0918.1
Padded support to rest comfortably the upper limbs, transforms the table for prone static activities. Possible insertion instead of the head section. Can be ordered in the same upholstery color of the table.
Fastening Strap
AC0005
Provides better restraint for the patient; can be fitted at the desired height by means of special guides (single piece).
Strap Cushion
AC0006
Padded cushion offering greater and more comfortable support to the patient. To be used in combination with strap code AC0005 (single piece).
Padded Trunk Strap
AC0560
A strap with a padded support for comfortable, safe, retention of the person. It is recommended for fitting at the trunk or pelvis.
Separate Leg Straps
AC0561
A strap with a padded support for positioning and stabilising an individual lower limb.
Padded Leg Strap
AC0088
A broad strap with a padded support for containing both lower limbs. It has a double fixing on the side and a system that facilitates fitting by the operator.
Shaped Strap 60
AC0913
It can be used for restraint of the torso/pelvis or for the legs. It's specific only for option 60 cm width of the tilt table. (single piece)
Shaped Strap 75
AC0947
It can be used for restraint of the torso/pelvis or for the legs. It's specific only for option 75 cm width of the tilt table. (single piece)
Cervical Cushion lt4
AC0949
Padded shaped cushion for lateral restraining and stabilization of the patient's head. Quick application with velcro strap. Adjustable in height.
Guide For Legs Strap
AC0912
Hand grip fixed onto a central rail located between the legs section of the static table. Easily mountable without the use of any tools. It allows to keep any stap aligned and improves the restraining of the legs.
Abduction Block
AC0911
Padded wedge, can be mounted on a central rail to keep the patient's legs apart. Easily mountable without the use of any tools. Improves the restraining of the legs.
Fixing Devices
AC0910
Pair of fixing devices allow the use of various lateral supports on the sides of the static table. They allow adjustment in height and depth along a lateral bar for a correct positioning of the supports.
Shaped Supports
AC0919
Supports made of black soft material with chromed parts which allow width, depth and height adjustment (attached to the fixing devices AC0910). They are an alternative or an additional choice in regards to the shaped supports code AC0922. (couple)
Coppia Spintori Tronco lt4
AC0922.
Padded supports with chromed parts which allow width, depth and height adjustment (attached to the fixing devices AC0910). They are an alternative.
Forearm Supports
AC0921
Forearm supports with hand grips for a comfortable hold. They can be adjusted in height and rotated, while the hand grips also have a depth adjustment. (couple)
Hand Grips
AC0920
Side handles to allow the patients to grip and support themselves while exercising in a static supine position. They can be adjusted in height and depth. (couple)
Service Tray 60, Wood
AC0914.060
Large size shaped wooden service tray, for 60 cm wide tables. It allows the application of additional accessories.
Service Tray 75, Wood
AC0914.075
Large size shaped wooden service tray, for 75 cm wide tables. It allows the application of additional accessories.
Service Tray 60, Polyethylene
AC0915.060
Large size shaped service tray in polyethylene, for 60 cm wide tables. It allows the application of additional accessories.
Service Tray 75, Polyethylene
AC0915.075
Large size shaped service tray in polyethylene, for 75 cm wide tables. It allows the application of additional accessories.
Abs Large Tray
AC0764
Extra tray made of ABS with raised edges to be applied on top of the chosen standard large service tray. Easily removable for cleaning.
Large Service Tray Padding
AC0767
Padded upholstery of the large tray. Available in three colours.
Single Footplate
AC0942
Single footplate which cannot be adjusted in tilt. The support block can be adjusted in depth for 21 cm centimeters along the side of the table. It can be combined with accessory AC0002. (1 piece)
Tilt Adjustable Footplates One Module
AC0943
Both footplates, right and left, can be adjusted independently in tilt +/- 20°; the supporting block can be adjusted in depth for 6 cm along the side of the table. They can be combined with accessory AC0002. (1 piece)
Tilt Adjustable Footplates Two Modules
AC0944
Footplates, right and left, can be independently adjusted in tilt +/- 20° and in depth for 8 centimeters along the side of the table. They can be combined with accessory AC0002. (2 pieces)
Wedge For Club Feet
AC0096
The foot rests can be adapted to provide a greater incline of the footrest that can go to -30° for extension and +10° for flexion, where required for patients with a club foot.
Portable Battery Charger
AC0319
Portable battery charger with compatible SHUKO socket. By request, it can be supplied with other type of plug.
Spare Battery
01132
Additional extractable battery for a continuous use of the patient lifter.
Foot Switch Holder
AC0575
Housing for the AC0083 accessory. Can be applied on either side of the base frame as preferred by the carer. Not suitable for therapy couches equipped with perimeter foot switch option (option B).
Handset 2
AC0744
For models fitted with two motors. Ergonomic handset with magnets, attachable to metal parts of the frame of the table. It comes with power cord.
Supine Head Section 60
AC0908.060
Head section that allows supine static exercises. It has two side hand grips and does not require fixing tools. Width 60 cm.
Supine Head Section 75
AC0908.075
Head section that allows supine static exercises. It has two side hand grips and does not require fixing tools. Width 75 cm.

Technical Spec.

Number of sections:;3;Maximum safe working load:;180 kg (electric version) / 135 kg (hydraulic version);Tilt adjustment:;electric / hydraulic;Power supply:;mains / battery;Tilt indicator in degrees:;standard;Max tilt degrees:;90°;Table height from the floor:;56 cm;Minimum user height:;135 cm (for prone position);Caster diameter:;12.5 cm;Individual brake system:;on each single wheel;Steering wheel:;standard;Padding upholstery safety class:;1 IM;Padding thickness:;3 cm;Density:;30 kg/m³;Weight:;55 kg